Now I write this post in forum, because I do not receive any answer to my previous e-mails.
I send it 18/05 and after 20/05
I must convert old application for Barcode recognition and Optical mark recognition in ".Net" enviroment.
I bought gdPicture to do it.
My recognition engine was developpede in c++ , using Visual studio 6.0, and require a DIB input to do recognition on it.
can you send me an example of GetDibFromGDPictureImage method?
have you try to work DIB prouiced from GetDibFromGDPictureImage method using unmanaged code?
Please answer also if you have received may previous e-mail.
I sent 2 message on 27 April, 1 message 18/05 , and 2 messages 20/05.
I did not receive any answer.
Last e-mail was send by different mail server and different e-mail address.
Is more important know if you receive may support request by e-mail.
Thank you for your attention.
Best regards.
Ezio Arnetoli
my e-mail address is ezio.arnetoli@technosoftsrl.it
Interface GDPicture.Net to Dll written in Vc++ 6.0
Re: Interface GDPicture.Net to Dll written in Vc++ 6.0
Hi,
We do not provide free support per mail. Here you are in the good place !
See vb6 exemple:
Dim oGdPictureImaging As New GdPictureImaging
Dim ImageID As Long
Dim ImageID2 As Long
Dim Dib As Long
Kind regards,
Loïc
We do not provide free support per mail. Here you are in the good place !
can you send me an example of GetDibFromGDPictureImage method?
Code: Select all
Dim ImageID As Integer = oGdPictureImaging.CreateGdPictureImageFromFile("")
Dim Dib As IntPtr = oGdPictureImaging.GetDibFromGdPictureImage(ImageID)
Dim imageID2 As Integer = oGdPictureImaging.CreateGdPictureImageFromDIB(Dib)
oGdPictureImaging.ReleaseGdPictureImage(ImageID)
oGdPictureImaging.SaveAsBMP(imageID2, "imagefromdib.bmp")
oGdPictureImaging.ReleaseGdPictureImage(ImageID2)
Yes. No problem found.have you try to work DIB prouiced from GetDibFromGDPictureImage method using unmanaged code?
See vb6 exemple:
Dim oGdPictureImaging As New GdPictureImaging
Dim ImageID As Long
Dim ImageID2 As Long
Dim Dib As Long
Code: Select all
oGdPictureImaging.SetLicenseNumber ("XXXX") 'Please replace XXXX by a valid demo or commercial license KEY
ImageID = oGdPictureImaging.CreateGdPictureImageFromFile("")
Dib = oGdPictureImaging.GetDibFromGdPictureImage(ImageID)
oGdPictureImaging.ReleaseGdPictureImage (ImageID)
ImageID2 = oGdPictureImaging.CreateGdPictureImageFromDIB(Dib)
Call oGdPictureImaging.SaveAsBMP(ImageID2, "c:\imagefromdib.bmp")
oGdPictureImaging.ReleaseGdPictureImage (ImageID2)
Loïc
Re: Interface GDPicture.Net to Dll written in Vc++ 6.0
Thank you for your answer,
I tried similar code in c# before ask you, and it work correctly, I had problem when I try to pass DIB to an external DLL.
Now I fix my trouble, The problem was in DIB you create, BITMAPINFOHEADER Height parameter was negative value, I convert it to positive and it works correctly.
About support you are right if you refer my question posted before 4/5/2009, but in this date I bought your product using Plimus and I receive a message where is specified esupport address to ask for technical question, with a response time of 2 days.
Please can you tell me your policy to support your customer?
What I must do if i Have a trouble to request a fix?
Please Can you tell me if you receive my previous e-mails or not, I want know if this channel of communication works or not?
Kind regards.
Ezio Arnetoli
I tried similar code in c# before ask you, and it work correctly, I had problem when I try to pass DIB to an external DLL.
Now I fix my trouble, The problem was in DIB you create, BITMAPINFOHEADER Height parameter was negative value, I convert it to positive and it works correctly.
About support you are right if you refer my question posted before 4/5/2009, but in this date I bought your product using Plimus and I receive a message where is specified esupport address to ask for technical question, with a response time of 2 days.
Please can you tell me your policy to support your customer?
What I must do if i Have a trouble to request a fix?
Please Can you tell me if you receive my previous e-mails or not, I want know if this channel of communication works or not?
Kind regards.
Ezio Arnetoli
Who is online
Users browsing this forum: No registered users and 1 guest